(Note: The origin of this information may be internal or external to Novell. Novell makes every effort within its means to verify this information. However, the information provided in this document is FOR YOUR INFORMATION ONLY. Novell makes no explicit or implied claims to the validity of this information.)
TITLE: Installing or Upgrading NetWare Lite v1.1
DOCUMENT ID#: FYI.P.6080
DATE: 03Dec92
PRODUCT: NetWare Lite
PRODUCT VERSION: All versions
SUPERSEDES: NA
SYMPTOM: NA
ISSUE/PROBLEM
Installing or Upgrading NetWare Lite v1.1
INSTALL NETWARE LITE v1.1
Use these procedures when the workstation does not have a copy of NetWare Lite v1.0.
If you install the same copy of NetWare Lite v1.1 on more than one computer on your network, you get a license violation error.
For Server-only, Client-only, or Server-client Workstations Loading from a Hard Drive.
1. Place the NetWare Lite v1.1 PROGRAM diskette into a disk drive. With the DOS prompt set to the disk drive, type INSTALL and press <Enter>.
2. Follow the instructions on the screen.
For Client-only Workstations Loading from a Client Diskette (Except those Loading from a Bootable 5.25-inch, Low-density Client Diskette)
1. Format a diskette (either bootable or non-bootable).
2. Place the NetWare Lite v1.1 PROGRAM diskette into a disk drive. With the DOS prompt set to the disk drive, type INSTALL and press <Enter>.
3. Select "Make this machine a client."
4. When the "Install Client" form appears, change the "Target directory for CLIENT software" field to a disk drive letter, press <Enter>, and follow the instructions on the screen. Files are copied to memory and a prompt appears.
5. When prompted for the target diskette, insert the formatted diskette into the specified disk drive, press <Esc>, and follow the instructions on the screen.
For Client-only Workstations Loading from a Bootable 5.25-inch, Low-density Client Diskette.
1. Format a blank, non-bootable diskette.
2. Format a blank bootable diskette.
3. Place the NetWare Lite v1.1 PROGRAM diskette into a disk drive. With the DOS prompt set to the disk drive, type INSTALL and press <Enter>.
4. Select "Make this machine a client."
5. When the "Install Client" form appears, change the "Target directory for CLIENT software" field to the same disk drive that the PROGRAM diskette is in, press <Enter>, and follow the instructions on the screen. Files are copied to memory and a prompt appears.
6. When prompted for the target diskette, remove the PROGRAM diskette from the disk drive, insert the non-bootable diskette into the same disk drive, press <Esc>, and follow the instructions on the screen.
7. Delete NET.HLP from the non-bootable diskette. This removes the online help function, but makes enough space to copy the files to a bootable diskette.
8. Copy the files from the non-bootable diskette to the bootable diskette. See your DOS documentation for copy instructions.
9. Boot the computer using the NetWare Lite v1.1 bootable client diskette.
UPGRADE FROM NETWARE LITE v1.0 to v1.1
Use the upgrade option to change a workstation's NetWare Lite v1.0 to v1.1. You can upgrade all computers on the network running NetWare Lite v1.0 to v1.1 with only one copy of NetWare Lite v1.1.
NOTE: It is imperative that all machines with NetWare Lite v1.0 be upgraded to v1.1 at the same time. Under no circumstances should both versions be on the same Network simultaneously.
For Server-only, Client-only, or Server-client Workstations Loading from a Hard Drive
1. Place the NetWare Lite v1.1 PROGRAM diskette into a disk drive. With the DOS prompt set to the disk drive, type INSTALL and press <Enter>.
2. Select "Upgrade this machine to v1.1."
3. Follow the instructions on the screen.
For Client-only Workstations Loading from a Client Diskette (Except those Loading from a Bootable 5.25-inch, Low-density, Client Diskette)
1. Place the NetWare Lite v1.1 PROGRAM diskette into a disk drive. With the DOS prompt set to the disk drive, type INSTALL and press <Enter>.
2. Select "Upgrade this machine to v1.1."
3. When the "Type the directory path of NWLITE 1.0" prompt appears, type the disk drive letter and press <Enter>. Files are copied to memory and a prompt appears.
4. When prompted for the target diskette, insert the workstation's client diskette into the specified disk drive and press <Esc>.
5. Follow the instructions on the screen.
For Client-only Workstations Loading from a Bootable 5.25-inch, Low-density, Client Diskette.
NetWare Lite v1.1 client software fits on a non-bootable 5.25-inch, low-density diskette, but it does not fit on a bootable diskette.
1. Format a blank, non-bootable diskette.
2. Copy the NetWare Lite v1.0 CLIENT.EXE from the original NetWare Lite v1.0 PROGRAM diskette or your NetWare Lite v1.0 client diskette to the non-bootable diskette. See your DOS documentation for copy instructions.
3. Place the NetWare Lite v1.1 PROGRAM diskette into a disk drive. With the DOS prompt set to the disk drive, type INSTALL and press <Enter>.
4. Select "Upgrade this machine to v1.1."
5. When the "Type the directory path of NWLITE 1.0" prompt appears, if your PROGRAM diskette is in drive A:, type A: and press <Enter>; if your PROGRAM diskette is in drive B:, type B: and press <Enter>.
Files are copied to memory and a prompt appears.
6. When prompted for the target diskette, remove the PROGRAM diskette from the disk drive, insert the non-bootable diskette with the copy of NetWare Lite v1.0 CLIENT.EXE on it into the same drive, and press <Esc>.
7. After CLIENT.EXE is upgraded and the other files are copied to the diskette, delete NET.HLP. This removes the online help function, but makes enough space to copy the files to a bootable diskette.
8. Copy the files from the non-bootable diskette to your NetWare Lite v1.0 bootable client diskette. See your DOS documentation for copy instructions.
9. Reboot the computer using the Netware Lite v1.0 bootable client diskette.
